For detail: http://bit.ly/13cwGcz
The Belkin WeMo Switch and WeMo Motion Kit gives you wireless control of your home appliances and electronics, turning devices of your choice on or off as soon as movement is detected. The sensor plugs into an outlet and detects motion up to 10 feet away. It then sends a wireless signal to the WeMo Switch to turn the connected device either on or off. Download the free WeMo app to any Apple device (iOS 5 or higher) to program a light to turn on when you walk into the house or a fan to turn off when you leave. WeMo Motion Turns Electronic Devices On/Off The WeMo Switch and WeMo Motion Kit makes it easy to set schedules for home appliances and electronics and turn devices on and off remotely. The sensor detects movement up to 10 feet away and wirelessly signals the WeMo Switch to turn the connected device on or off, depending on your preference. The sensor’s 6-foot cord lets you place it in the optimal position. To get started, simply plug the sensor’s A/C module into an outlet in your home and position the sensor. Next, plug the WeMo Switch into a separate outlet, and plug a device like a heater, fan, lamp, or stereo into the switch. Next, download the free WeMo app from the Apple app store to your iPhone or iPad. Connect the sensor and switch to your home Wi-Fi network and follow the onscreen instructions to complete the installation. Control Devices Using Your iPhone or iPad You can use your iPhone or iPad to tell the sensor what to do, like have a heater turn off when you exit a room. You’ll have wireless control wherever you go–the WeMo kit connects to mobile Internet networks so you can program the sensor to turn devices on or off even if you’re away from home. Set Schedules with WeMo App The free WeMo app makes it easy to set schedules for appliances and electronics in your home. Use your iPhone or iPad to program a lamp to...
No comments:
Post a Comment